Pinball Owners

Pinball Collection of dallaspinball
2 members like this
Member: dallaspinball
From: Dallas,TX USA (find on the map)
Specialty: Electromechanicals from all ages
Member since: 02/18/2010
Website: dallaspinball
70 pinball machines
last updated: 08/05/2018
4 Collectors in dallaspinball's network   show
pinball nameDBmanufacturerconditionis it for sale?notespictures
ABRA CA DABRA Gottlieb (USA)In storage, waiting for restorationNeverI picked up a nice condition Abra-Ca-Dabra that has been in a home for nearly 25 years with minimal play. The inserts are all loose and need to be reglued but are fairly flat and the playfield with need very minor touchups. Original backglass was flaking bad on the robe but I managed to get one of the repro backglasses. Usual three plastics are broke and I will be ordering a repro set of plastics when they are available. Very fun game to play. Just needs some cleaning and minor repairs. Long term keeper in my collection...
AL'S GARAGE BAND GOES ON A WORLD TOUR Alvin G. (USA)Set up, plays!NeverMy first DMD pin. It has been repaired and cleaned up. It had some bugs to work out like a dead spinner motor and a couple dead or flaky light sockets and switches. It had a really weak right flipper that was also repaired. I acquired a NOS playfield as well for cheap.
ALOHA Gottlieb (USA)In storage, waiting for restorationNever
APOLLO Williams (USA)In storage, waiting for restorationMaybeProject game. Been sitting a long time. Some flaking and lifting issues on the backglass. Playfield should clean up nice needing only minor touchups. Game has had some hacks but should be fixable. It tries to start but cannot complete a reset. Several burnt coils were found when I got it open after buying it.
AROUND THE WORLD Gottlieb (USA)In storage, waiting for restorationNever  
BEAT TIME Williams (USA)In storage, waiting for restorationMaybe  
BIG GUNS Williams (USA)Set up, plays!NeverIn really good shape. Plays very well. Lots of fun to play. Lower two 7-segment displays have outgassed. Installed a replacement display module from Pinscore. Ramps are very yellowed and the right one has taken some air balls and is cracked. Looking for better condition ramps. Playfield is worn but I have a NOS playfield to swap with someday. Needs GI lighting connectors and headers rebuilt as the lights are very dim.
BLONDIE Chicago Coin (USA)In storage, waiting for restorationNeverMy first woodrail in my collection and my second EM. Really dirty and needs lots of cleaning. Some missing parts need to be replaced but it should clean up nice. Cabinet has been refinished with a dark shellac or stain. Will need to be redone. Backglass in decent shape with limited flaking and missing paint. Playfield has badly crackled and yellowed varnish that will need to be removed. Playfield paint under the varnish is nice.
BLUE RIBBON Bally (USA)In storage, waiting for restorationNeverProject game. Some backglass flaking around score displays.
BONANZA Gottlieb (USA)Set up, needs some workNever
BUMPER Bally (USA)Set up, plays!NeverWon ribbon for runner-up Best Antique (pre-1960) pinball at the 2018 Texas Pinball Festival.  
CARD TRIX Gottlieb (USA)Set up, needs some workNeverNice game I picked up from a friend. Currently it needs a switch replaced that causes it to reset all lit cards on every ball. After playing it this way for a while, I like how it makes the game harder. I have still rolled it a few times.  
CENTAUR II Bally (USA)Set up, plays!NeverProject game I picked up recently. Lower 3 inches of backglass has lifted and is being held together by tape. Playfield is in decent shape with some wear but better than most. Spent nearly 100 hours repairing the boards and undoing the wiring hacks to get the game working again. Drop targets replaced. Looking for a NOS or repro playfield and backglass. I really enjoy this pin...
CHAMPION RIFLE RANGE  Chicago Coin (USA)In storage, waiting for restorationNever1962 Chicago Coin 'Champion Rifle Range'. EM rifle game with a pinball playfield. Rifle stock shattered during shipping. :-(  
CLASS OF 1812 Gottlieb (USA)Set up, plays!Never
CLASSY BOWLER Gottlieb (USA)Set up, plays!NeverI picked up this game from another collector. It is a very fun game to play. The inserts are cupped and someday will be leveled and the playfield will be touched up. Need to order repro plastic set as mine is missing all of the original plastics.  
COMBAT Zaccaria (Italy)Set up, needs some workNeverVery nice shape game. Will setup soon and start working on getting it running again.
CONTEST Gottlieb (USA)In storage, waiting for restorationNeverLooking for good clean scans of the plastics since mine are toast. Currently having an issue where player 3 and 4 do not receive the reset pulses on the score reels. Still working on troubleshooting that issue. Game plays well otherwise. Some playfield wear that I hope to someday get touched up. Bought at a pinball show after spending about two hours hooked on playing it during the weekend. Lots of nudging needed to keep the ball in play... Fun game.
CYCLONE Williams (USA)Set up, needs some workNeverMostly working preflipper pin. Looking for better backglass.
DIXIELAND Bally (USA)Set up, plays!Never  
DOOZIE Williams (USA)Set up, needs some workNever
ELEKTRA Bally (USA)Set up, plays!Never
EXPO Williams (USA)Set up, plays!NeverGot the game in trade at the 2017 Texas Pinball Festival.  
FARFALLA Zaccaria (Italy)Set up, needs some workNeverJust picked up. Needs some work.
FIREBALL Bally (USA)Set up, needs some workNeverAfter five years of searching I finally found a Fireball that was in decent shape and was within my budget. It needs some repair and touchup but should clean up to be a real nice game.
FOUR STARS Gottlieb (USA)In storage, waiting for restorationNever  
GETAWAY Allied (USA)In storage, waiting for restorationNeverProject game. Does not power on. Has been sitting a long time and will need some attention to get it running. Backglass has some crazing and flaking issues. Playfield will clean up nice. Cabinet is a little rough with paint flaking. Had been stored for a few months on a porch in the Texas heat and about a decade in a storage building before that.
GOLD RUSH Bally (USA)Parts machineNeverLower cabinet only. Looking for back box to try and save the game from being parts.  
GUSHER Williams (USA)Set up, needs some workNever  
HEARTS SPADES Allied (USA)In storage, waiting for restorationNeverAnother cocktail pinball machine. I got it for a good price. It needs lots of work to restore but should clean up nice. It is on the list of pins to repair/restore but will be a while. Will use some parts from water damaged Take Five to fix this one as well.
HEAT WAVE Williams (USA)In storage, waiting for restorationNeverProject game. Missing backglass, playfield has some wear but should clean up and restore nicely. Cabinet needs some repair and a repaint.  
HEAT WAVE Williams (USA)In storage, waiting for restorationNeverProject game. Decent backglass, good plastics, decent playfield, cabinet will need a repaint.  
HI DOLLY Gottlieb (USA)In storage, workingNeverOverall a nice condition working game. Backglass has some minor flaking but still looks decent.  
HI-SCORE Gottlieb (USA)In storage, waiting for restorationNeverI won this game in a raffle drawing. Was working before I brought it home but now it is acting up and not wanting to work right. Needs a little TLC but will be a nice game to play when I get it working properly again.  
HI-SCORE POOL Chicago Coin (USA)In storage, workingNeverVery unusual and fun game. The 8-ball was melted but I found a NOS replacement. Converted the game over to LED's everywhere except the flashers behind the title on the backglass. Even replaced the 120v light bulbs under the apron with 120v fronted white LED ceiling fan bulbs. Game looks awesome and is a ton of fun to play as a two player where you can steal each other's racks.
HIGH HAND Gottlieb (USA)In storage, waiting for restorationNever
JOUST Bally (USA)In storage, waiting for restorationNeverCurrently under repair. Nice condition playfield and backglass. Found several cracked and broken actuator plates in the trip reset bank. I picked up some replacements that should work once I can pull the game apart again.
LAWMAN Gottlieb (USA)In storage, waiting for restorationYes!
contact me
Regretted selling my other Lawman so I picked this one up to eventually restore. Rough shape currently. Head is smashed and needs replacement. Looking for better backglass and the playfield will need touchup.  
LITTLE JOE Bally (USA)Set up, plays!NeverWas my first EM game. Needs some paint touch up but is otherwise in decent shape. Backglass is faded and has some flaking. Fun game to play.
MATA HARI Bally (USA)Set up, plays!NeverHad been in storage for a while before I got it. Tore it apart and rebuilt it in a week and got it working again. New universal Bally MPU replaced the battery acid damaged MPU board. Rebuilt the power supply board and replaced headers and pins. Few other minor fixes needed. Playfield is pretty good but does have some spots that could use a little touch up paint. Backglass only has a few scratches and is in pretty good shape. Will probably pick up a CPR repro playfield and plastics soon to install someday.
METEOR Stern (USA)Parts machineNeverPoor condition parts game. Bought it for parts needed to fix up several other Stern games.  
MOULIN ROUGE Williams (USA)In storage, waiting for restorationNeverPicked up the game for a good price. Hope to restore it someday. Playfield is decent, backglass has some flaking and fading, cabinet is a little rough. Plastics are warped badly but should be able to flatten and are otherwise in okay condition for the age.  
MUSIC MAN Williams (USA)In storage, waiting for restorationNever
PINBALL Stern (USA)In storage, waiting for restorationNeverEM version.  
REVENGE FROM MARS Midway (USA)Set up, plays!NeverJust picked up this very nice condition single owner game.  
RIVER BOAT Williams (USA)Set up, needs some workNeverProject game. Was working when put up for storage a few years ago. Needs a new backglass as the current one is poorly touched up.  
SCORE-BOARD Gottlieb (USA)In storage, waiting for restorationNeverProject game. Needs new backglass, plastics are shot and need replacement, playfield is a little rough. Will try to save this game if I can find the parts needed to do so.  
SEA BELLES Gottlieb (USA)In storage, waiting for restorationNeverProject game...  
SEAWITCH Stern (USA)Set up, plays!Never
SEVEN SEAS Gottlieb (USA)In storage, workingNever
SEVEN UP Williams (USA)In storage, waiting for restorationNeverPicked up this project from a friend. The playfield is very badly worn and in rough shape. He also happened to have a much better but dirty playfield that was missing some of the assemblies that I will be cleaning up and installing in the game.  
SILVERBALL MANIA Bally (USA)Set up, plays!NeverThe machine that started my collection. Playfield showing it's age but not too bad where the mylar is covering. Backglass is starting to have major issues though. I picked up a reproduction playfield, plastics and backglass from CPR. Will find a cheap rough game to restore and sell my original after the swap is complete.
SLICK CHICK Gottlieb (USA)Set up, plays!Never  
SPANISH EYES Williams (USA)Set up, plays!NeverBought at the 2015 Texas Pinball Festival swap meet. Got it working within an hour of buying the game. Will need a cabinet repaint and some minor playfield touchups to be a really nice game. Really nice backglass with only a few minor flaking in a few spots.
SPIN-A-CARD Gottlieb (USA)Set up, plays!NeverNice condition working game I bought from a friend. Lots of fun to play.  
SPOT-POOL Williams (USA)Set up, plays!NeverFun game I picked up from a friend at the Houston Arcade Expo.
STAR GAZER Stern (USA)Set up, plays!NeverMy holy grail of pinball. It took me five years of searching but I finally found one for a reasonable price. It is not for sale. It is mostly working but does have a rough playfield and a nice backglass. I have already picked up repro plastics and am on the pre-order group for the repro playfields when they are available. Lots of wiring hacks and common repairs needed to bulletproof the game. I fell in love with this pin the first time I played it five years ago and really enjoy the flow and loopy shots.
STARS Exhibit (USA)In storage, waiting for restorationNeverPre-flipper woodrail. Over 70 years old. Needs all parts on top of playfield replaced. All bumpers are either broken, missing or beyond hope of repair. May have to retrofit with more modern replacement parts to get it working. Cabinet had beem painted orange. Once working, I will strip and repaint the cabinet as close as I can to factory colors and pattern. Backglass has some fading and flaking. Not bad considering it was built before WW2.
STINGRAY Stern (USA)Parts machineNeverParts game. No backglass. Missing all boards and displays. Missing some components from playfield. Will attempt to put game back together rather than parting it out.  
STRAIGHT SHOOTER Gottlieb (USA)In storage, waiting for restorationNever  
SUPERSONIC Bally (USA)In storage, waiting for restorationNeverThe cabinet could use some touch up paint. The playfield is badly worn but I found a good condition playfield to do a playfield swap with once it is touched up and clear coated. Good backglass with small missing spot where lock bar hits glass. Was playable but had battery acid damge on MPU and burnt power headers make it very flakey until that is fixed. Played okay but looked rough before it went into storage.
SURF SIDE Gottlieb (USA)In storage, waiting for restorationNever  
TAKE FIVE Allied (USA)In storage, waiting for restorationNeverCurrently being restored. Using parts from water damaged Take Five to make one working machine. I got it cheap. Had been in storage for years. Lots of corrosion and white mold from damp storage. Looking pretty good now. Had the wrong plastics on it. Roy Clark and Take Five have the same layout but different artwork. Using plastics from water damaged Take Five that is correct.
THEATRE OF MAGIC Midway (USA)Set up, plays!NeverI thought I would never be able to afford a TOM, but I found one for a good price through a local operator who was downsizing his warehouse and have a price I couldn't pass up. The cabinet is in really nice shape with a few minor dings and dents in the artwork. Playfield is very nice but has some ghosting on the inserts above the flippers along with 2-3 lenses that need to be reset flush with the playfield. They have a corner or two sticking up... Lots of busted plastics and dirt from being a route game for 10 years. DMD showing burn in the corners. The trunk gearbox needs to be disassembled, cleaned and relubricated and the motor replaced as the game keeps having trunk errors when turning or hit. Already replaced the busted opto interrupter disc with a metal one and installed new truck opto board. Will be ordering new ramps, plastics, plastic protectors, and stickers. I am also planning on doing a full LED conversion and putting the tiger saw mod and top mirror replacement mods on the game. When I get finished with it, I will have a really nice TOM for less than normal going prices. Recently had a tech come over and spend two hours fixing a bunch of issues with the game.  
TIME WARP Williams (USA)In storage, workingNever
TOP CARD Gottlieb (USA)Set up, plays!NeverSame Top Card that I had sold a while back. Regretted selling it and had the chance to buy it back.
TOP SPEED Recel (Spain)In storage, waiting for restorationNeverProject game. Hoping to have it cleaned up and working by the 2016 Texas Pinball Festival.
TUMBLEWEED  Exhibit (USA)In storage, waiting for restorationNever1949 Exhibit Supply Tumbleweed woodrail. Needs a coin door and lockdown trim bar. Some inserts will need to be replaced but the game should be fixable.
TUMBLEWEED  Exhibit (USA)In storage, waiting for restorationNeverA second and more complete Tumbleweed project game. This one is missing the backglass but is in better overall shape than the one I already had. Should be able to build out one nice working game and have a decent project game available. Will probably have the backglass and plastics reproduced for the restoration.
X'S AND O'S Bally (USA)Parts machineNeverMissing backglass and has rough playfield. Will probably use parts off it to fix up my other X's & O's. Not sure if the remainder will be sold as a project game or be parts...  
Pinball machines that dallaspinball used to own in the past
(the following games are no longer part of dallaspinball's collection)
pinball nameDBmanufactureris it for sale?notespictures
BANK-A-BALL Gottlieb (USA)Sold Nice shape and working game. Does have small backglass lifting issues around one of the cue balls on the pool table. Sold 9/13/2016.
CHEETAH Stern (USA)Sold Nice condition and mostly working game picked up at auction. Near perfect backglass. Game currently does not kick the ball into the shooter lane and only one side of the flippers works. Ended up trading the game to a friend.  
CITY SLICKER Bally (USA)Sold Low production game. Only 300 made. Fun and hard to find game. The only video currently of this game being played was uploaded to Youtube by me. A wire got smashed while setting it up at the Texas Pinball Festival in 2012 and it damaged some boards. Game has been sold to a friend and he is in the process of getting it back working 100% again.
COMET Williams (USA)Sold Picked this game up recently from an old arcade operator warehouse. Major water damage to the cabinet. Backglass is decent with a pair of scratches across the middle. Playfield is super dirty and worn where the mylar was not covering. Got it cheap and figured it would be a parts donor until I managed to get it working after buying it before I got it out of the warehouse. Looking for a suitable replacement cabinet and hope to keep this game together and not part out.  
DIAMOND LADY Gottlieb (USA)Sold 
ESCAPE FROM THE LOST WORLD Bally (USA)Sold Good backglass, some wear on playfield. Has the silkscreened playfield glass. Found replacement ramps that were not cracked up as bad as the originals. Fixed GI issues and a few other minor issues found when shopping it out. Fun game that is not very common. Took some searching but I finally found the correct extra long rear legs as it came with the standard 28-1/2" legs on both the front and back. Currently the audio pot is acting flaky and the left ramp is warped a little causing the ball to get stuck at the top of the ramp where it splits if it is moving too slow.
FLIPPER PARADE Gottlieb (USA)Sold Working game bought at 2015 Texas Pinball Festival. Traded to a friend. He will have it on loan and setup at a children's hospital.
FLYING CARPET Gottlieb (USA)Sold Good backglass, slightly worn playfield, cabinet repainted. Has been sitting for years in a house. Needs some work and is totally full of dust... Rubber rings are falling apart and it does not appear to have been cleaned or waxed in 20+ years. Will take some work to bring back to working shape and will probably repaint the cabinet eventually...
GALAXY Stern (USA)Sold Project machine. Needs lots of work. Backglass in really good shape and cabinet paint in decent shape for it's age. Play field has heavy wear so I will be looking for another one in better shape. On waiting list of pins to fix and restore but it will be a while.
HARLEM GLOBETROTTERS ON TOUR Bally (USA)Sold Really rough parts machine. Only has lamp board, power supply, coin door and playfield that is in rough shape. Got it at auction for real cheap.  
HI-SCORE POOL Chicago Coin (USA)Sold Picked up a second Hi-Score Pool from a friend for a great price. Ended up trading it to a friend.  
HOKUS POKUS Bally (USA)Sold Needs some minor repairs to be playable again. Nice backglass. Some paint pen touchups on playfield.  
HOT HAND Stern (USA)Sold In decent condition. Some small pin points of flaking on the backglass. Some electronic repair needed to get it working. Has been a few years since it last worked. Sold July 2012.  
JACK IN THE BOX Gottlieb (USA)Sold Sold to a friend as their first EM pinball.  
JUMPING JACK Gottlieb (USA)Sold Just picked this pin up on 2/24/2012. Backglass in great shape, playfield very good with slightly cupped inserts and a little wear where the ball lands from the kick out holes. Cabinet in good shape but very yellowed from cigarette smoke. Was playable when I bought it but needed new rubber rings and some bulbs. No key for coin door so I couldn't pull the ball out. As I unloaded it at storage, the ball slammed into a drop target and broke it off. :-(
JUMPING JACK Gottlieb (USA)Sold   
JUNGLE LORD Williams (USA)Sold Project game.
LAWMAN Gottlieb (USA)Sold Project game. Sold to a friend for his first game who is just starting in the pinball hobby.
LECTRONAMO Stern (USA)Sold Project game. Does not boot and needs repair. Sold at 2014 Texas Pinball Festival swap meet to a fellow collector.  
MAGNOTRON Gottlieb (USA)Sold Parts game. Missing backglass, playfield was repainted black for retheme that was never completed. Has been parted out.  
MARATHON Gottlieb (USA)Sold Project woodrail I picked up from someone who was moving and had it for sale. I have not yet done anything to the game yet or set it up. In okay shape for it's age. Will need to be shopped out but was "working" a few years ago when put into storage... Sold to a friend as a project.  
MARS GOD OF WAR Gottlieb (USA)Sold Will need a fair bit of work but should be able to bring it back from the dead. Missing original inner backglass. Most of the coils had locked on and will need to be replaced after fixing the actual problem that caused everything to lock on. Outer backglass is flaking and a replacement will also probably be needed. Sold July 2012.
MATA HARI Bally (USA)Sold Picked up at a garage sale recently. Battery acid damage to the MPU, burnt power connectors, atleast one coil has melted the coil sleeve. When I started cleaning the playfield it started loosing paint like crazy so I stopped for now. Will revisit this project later.  
MIBS Gottlieb (USA)Sold Working game. Traded to a friend.
PINBALL Stern (USA)Sold SS version. Traded to a friend for a pair of Atari Video Pinball project arcade games.  
PINBALL POOL Gottlieb (USA)Sold   
RANCHO Williams (USA)Sold One of the metal cabinet versions. Backglass and playfield in nice shape. Some cupping of the inserts but not too bad. Working game. Traded to a friend.
SILVERBALL MANIA Bally (USA)Sold Currently non-working but plan to restore. In decent shape and should be repairable. Will probably trade it with a friend for another pin once it is repaired.
SLICK CHICK Gottlieb (USA)Sold Traded extra Slick Chick to a friend who helped with restoration of my other one.  
SOLAR CITY Gottlieb (USA)Sold   
SOLAR RIDE Gottlieb (USA)Sold   
SPACE INVADERS Bally (USA)Sold Picked up at auction on 12/11/2011. Good backglasses, worn playfield. Upper right flipper coil was missing. Cleaned and waxed the playfield and it looks much better. Will look for a better playfield to swap to. About half a dozen lights are still not working after changing all bulbs. Bad or dirty light sockets need to be fixed.  
SPACE INVADERS Bally (USA)Sold Almost finished project game. Perfect backglass, above average playfield with very little wear, average cabinet condition. CPR plastics ordered for game. Game sold at auction on 6/25/2016.  
SPACE MISSION Williams (USA)Sold Project game. Head is missing backglass, some trim and is smashed up. Wiring harness in head also cut in a few places and a few broken parts. Sold as a parts game to a friend who is fixing up a Space Odyssey or Space Mission.
SPACE ODYSSEY Williams (USA)Sold Sold game to a friend who was looking for her first EM pinball.
SPACE RIDERS Atari (USA)Sold Project game in nice condition but needs some board repairs. Sold to a friend.
SPACE SHUTTLE Williams (USA)Sold Working and playable with a few minor issues. Good backglass. Worn playfield and some cracked plastics. SOLD! 12/5/2011
SPIN-A-CARD Gottlieb (USA)Sold Project game. Playfield has planking issues. Plastics and backglass are nice. Only a small dime size defect in the backglass artwork and a few pinholes showing. Cabinet is decent for it's age. Will try to get running and sell or trade at some point.
STRANGE SCIENCE Bally (USA)Sold Playfield and backglass is very good shape. Bought it from a guy that said it had quit working on him before he put it into storage. Was at the 2010, 2011, 2012 Texas Pinball Festival. In 2012 it took home the 2nd place Best Original ribbon. My game was used by Cointaker to work out the LED kit for Strange Science. Sold game to a friend who really wanted it.
SUPERSONIC Bally (USA)Sold The cabinet had been repainted with spray paint. Playfield is badly worn and has areas of delaminated wood fiber around the kickout hole and in the shooter lane. Parts machine. Good backglass has been sold already. Sold the lower cabinet and head as well. Only have the boards and the playfield for parts.
SUPERSONIC Bally (USA)Sold Parts playfield. Using as parts donor for all of my early Bally machines. Got it cheap. Had a bad paint touch up attempt and is covered in Mylar.
SURFER Gottlieb (USA)Sold Project game I bought from a friend. The playfield, plastics and backglass are in very nice shape. Cabinet was repainted in a funny color scheme. Some dry rot and flaking on the bottom edge of the cabinet, mainly on the right side. Currently the game needs every moving assembly serviced as someone greased every coil and assembly and it has turned to gunk. May have found a lower cabinet body from a parts game I picked up that does not have the delamination or dry rot issues.
TAKE FIVE Allied (USA)Sold Machine had been rained on several times when the seller had it at another swap meet. Got it cheap but found that it was totally waterlogged and moldy. Stripped machine for parts. Water staining on upper right playfield corner. So far it has been used to help fix up three other Allied Leisure pins.
TIME WARP Williams (USA)Sold Parts game. Lower cabinet only. Bottom of cabinet is gone along with the transformer. Will use the playfield to swap out with my existing Time Warp since it is in better shape.  
TOP CARD Gottlieb (USA)Sold Picked up on July 16th, 2012. Basically a working pin needing a few minor repairs. My first Gottlieb wedgehead EM.
TOP TEN Chicago Coin (USA)Sold Picked this up from a friend. Was mostly working but was very ugly. Playfield is really ugly since someone tried their hand at touching it up with a small brush and couldn't paint within the lines, color match or have an even color where they painted. Cabinet has also been repainted black on the front and one side and has original artwork on the other side. Backglass is okay. Picked up a much nicer playfield at the TPF and will be swapping it out later this year. Eventually it will probably be repainted.  
TORPEDO ALLEY Data East (USA)Sold Non-working project machine. Playfield has some wear but nothing too major. Some broken plastics and/or yellowed plastics. Ordered replacement center island plastic and decals for the pop bumpers, drop targets and a few other places. Had a local tech rework the boards and need to reinstall them still. Once I have the game booting I will finish putting the playfield back together as I want to make sure all the LEDs I am installing work properly under all the layers of stuff I had to remove before covering it all back up. When I got the game nearly every light was burned out or silvered badly and the game was very dirty.  
TRIPLE STRIKE Williams (USA)Sold Project game. Sold to pinball newbie as a first pinball project.  
WIZARD Bally (USA)Sold Project game. Sold to a friend.  
X'S AND O'S Bally (USA)Sold Machine was in really rough shape. Parted out. Backglass has lost most of the artwork, playfield shows some wear and fading, cabinet has some moisture damage. I have been using this machine as a parts donor to fix up my working X's & O's and my other pins. Plastics badly faded and discolored. Battery acid damage and burnt components on the boards.  
X'S AND O'S Bally (USA)Sold Bought it as a non-working project. I completely rebuilt all 3 flippers with all new parts. It had been sitting for 4 years before I got it since the upper flipper coil had failed and the repair guy made a mess of the lower left and upper right flippers and then wanted more money than the previous owner wished to pay and everything was left in pieces in the game or not wired up. Playfield has some wear around the playfield inserts and in both top ball loops. Fun pin to play with cool sounds. Was at the 2011, 2012, and 2013 Texas Pinball Festival. Good backglass. Needs a few minor repairs after 1500 plays at the TPF in 3 years but has been a reliable pin for me.
XENON Bally (USA)Sold Good backglass, trashed playfield. Looking for CPR repro playfield and plastics now. The pin does have some board hacks to fix and a few under playfield repairs needed. Sold July 2012.
DISCLAIMER: This page shows the pinball machine Collection of PinballOwners member dallaspinball from Dallas, TX, USA. The coin operated pinball machines listed above, including their images, were uploaded into our database by dallaspinball himself; dallaspinball is the sole responsible for the information contained in this page. The pinball machines shown above are not necessarily for sale! Please refer to the 4th column in the list to know whether a certain pinball is for sale or not. Most likely dallaspinball's pinball machines are second-hand (used) pinballs that were once installed in bars and other public places; their value as a collectible largely depends on appearance and functionality of every single machine.
Comments left by other members of our website
 From gorgar on 01-22-2017 11:21:
Very, very cool collection which i really would like to play some games on.
The Problem is: i am from Germany! But maybe someday...
Keep on rockin' the silverball!
Greetz: Gorgar
 From integ194 on 10-26-2016 06:59:
A wonderful diverse collection-congrats.
dallaspinball's network - Collectors that dallaspinball trusts
4 Collectors in dallaspinball's network:
Dallas, TX, USA
Dallas, TX, USA
Carrollton, TX, USA
Rockwall, TX, USA
Troubles? Questions? email the webmaster!
the use of this website implies your acceptance of our Code of Conduct