| pinball name | DB | manufacturer | condition | is it for sale? | notes | pictures |
| FIREPOWER |
 | Williams (USA) | Set up, plays! | Never | Cosmetically a piece of sh*t but plays 100% and is complete:-) Update 17/7/2007 this machine continually kicks my arse!!!! 29/04/2011 Pre-ordered CPR playfield! |
|
| GAME SHOW |
| Bally (USA) | In storage, waiting for restoration | Maybe | 30/10/10 Bought as non-working project. Stripped down and magic erased playfield and currently levelling inserts with variable results! |
|
| MATA HARI |
| Bally (USA) | Set up, needs some work | Yes!
contact me | Bought as project and it certainly is. Loads of work required-pf is ball swirled marked to death! 3/3/08 stripped pf and polished metalwork. Removed sunken inserts ready for re-insering and levelling them. Only broken two!!:-) Looking for new or good condition pf. Not one that you can retire on the basis of the sale though. 3/9/08 Started to touch up playfield...it looks sh*t! 15/12/09 Not too bad for a first pf resto attempt...learnt a lot. Bought Alltek board as could not get original MPU to work but now (01/01/2011) lost all voltages off modified rectifier board...jeez! Re-fitted pop bumpers including soldering pop bumper lamp holder but forgot to put mylar trim platters down..CRAP! |
|
| |
| |
Pinball machines that flynn50 used to own in the past
(the following games are no longer part of flynn50's collection)
|
| |
| |
| pinball name | DB | manufacturer | is it for sale? | notes | pictures |
| BARRACORA |
| Williams (USA) | Sold | | 14/06/09. Another project. Pf covered top to toe in mylar and looked v. good (just like the Warlok). However, it was hiding a severely ball swirled pf and removal brought a lot of paint up leaving lots of little white spots all over. Some wear at top of pf also. Decided to go for full bifta pf touch up. Half way through. Looks OK at best. How does anyone manually do the gradual dithered changes from e.g. blue to black? Back glass excellent condition. Complete too:-) All boards to be serviced and repaired. No idea if displays work. 14/12/09 Update...pf completed and doesn't look bad at all, clearly not original though. All re-built but won't boot..awaiting test chip. Update 12/06/10 Update! A complete nightmare of a project but now fully working! SOLD! |
|
| DEVIL'S DARE |
| Gottlieb (USA) | Sold | | About to start mylar removal !(17/04/2007) wish me luck! Update 01/06/2007. Mylar came off without a problem. I used sticky label remover and a hairdryer - DO NOT USE FREEZE SPRAY! Game now booting...nearly there!!!!! 17/07/2007 Everything working except kickback!!! 01/09/07. New MPU to driver connector has cured kickback problem. SOLD!! |
|
| F-14 TOMCAT |
| Williams (USA) | Sold | | Dying to get started on this project but promised myself I wouldn't touch it until Mata Hari was finished....2010 then! SOLD!! as a project...just never got round to it. |
|
| FLASH |
| Williams (USA) | Sold | | eBay classic - should have known better than to buy from an op:-) Half way through fixing it and got fed up. SOLD!!! |
|
| JURASSIC PARK, THE LOST WORLD |
| Data East (USA) | Sold | | 3/9/08 Needed BSMT chip which I picked up from the states. Display allegedly not working but not had chance to look at it yet. Back of the restoration queue! UPDATE 15/12/09..never got round to this one. Sold it to generate some cash fro Chrimbo:-( |
|
| TIME WARP |
| Williams (USA) | Sold | | Backglass has peeling and head needs re-spraying. Currently sorting PCBs out. Update 01/06/2007 - just waiting for ROMs and should be sorted. 17/07/2007 Cpu boots but then crashes in attract mode and diagnostics not working. Switch matrix???????? New PIA chip on CPU board sorted the problem. Now SOLD!!! |
|
| WARLOK |
| Williams (USA) | Sold | | Not bad nick. Bought as project and picked up spare playfield covered completely in mylar expecting a pristine pf underneath. Sadly not quite the case but in reasonable nick for age and lower pf vgc. 12/12/2008 set up and working! SOLD |
|
